View source for DEMONSTRATE-MIT Introduction to Computer Science and Programming in Python 6.0001 Fall 2016 Undergraduate

{{:LICENCE_HEADER_CC_BY-NC-SA_4.0}}


<!-- This site is non commercial and is a concept development.
<br>
Note - this is quickly put together to test and demonstrate hosting heavy data content on IPFS. -->
<b>
NOTE: This page is for demonstration purposes Only, and is not meant to be hosted on CompleteNoobs.com which is not intended to contain CC_BY-NC-SA Licensed Content.  
<br>
This page is CC_BY-NC-SA It is intended for a fork of "CompleteNoobs.com" called "CompleteNoobz.com"
<br>
CompleteNoobz.com is a noncommercial mirror of CompleteNoobs.com Which can pullin CC_BY-NC-SA Licensed Content
<br>
This page is quickly put together to test and demonstrate hosting heavy data content on IPFS.
<br>
It is a first draft (UNFINISHED) and required many more Reiterations, This content is first draft concept demonstration content.
</b>


==Course Information==
===Source===
https://ocw.mit.edu/MIT OPEN COURSEWARE - MASSACHUSETTS INSTITUTE OF TECHNOLOGY.<br>
Donations to support MIT Open Courseware <code>https://giving.mit.edu/give/to/ocw/</code><br>
<br>
https://ocw.mit.edu/courses/6-0001-introduction-to-computer-science-and-programming-in-python-fall-2016/download/<br>
https://ocw.mit.edu/courses/6-0001-introduction-to-computer-science-and-programming-in-python-fall-2016/pages/assignments/<br>
https://ocw.mit.edu/courses/6-0001-introduction-to-computer-science-and-programming-in-python-fall-2016/resources/lecture-videos/<br>

==Syllabus==
<div class="toccolours mw-collapsible mw-collapsed">
Syllabus
<div class="mw-collapsible-content">

===Course Meeting Times===

Lectures: 2 sessions / week, 1 hour / session

Recitations: 1 sessions / week, 1 hour / session

===Course Information===

6.0001 Introduction to Computer Science and Programming in Python is intended for students with little or no programming experience. It aims to provide students with an understanding of the role computation can play in solving problems and to help students, regardless of their major, feel justifiably confident of their ability to write small programs that allow them to accomplish useful goals. The class will use the Python 3.5 programming language.

This is a half-semester course. Students who successfully complete 6.0001 may continue into 6.0002 Introduction to Computational Thinking and Data Science, which is taught in the second half of the semester.

===Goals===

*Provide an understanding of the role computation can play in solving problems.
*Help students, including those who do not plan to major in Computer Science and Electrical Engineering, feel confident of their ability to write small programs that allow them to accomplish useful goals.
*Position students so that they can compete for research projects and excel in subjects with programming components.

===Textbook===

The textbook is Buy at MIT Press Guttag, John. Introduction to Computation and Programming Using Python: With Application to Understanding Data Second Edition. MIT Press, 2016. ISBN: 9780262529624. The book and the course lectures parallel each other, though there is more detail in the book about some topics. It is available both in hard copy and as an e-book.

===Lecture and Recitation Attendance===

A significant portion of the material for this course will presented only in lecture, so students are expected to regularly attend lectures.

Recitations give students a chance to ask questions about the lecture material or the problem set for the given week. Sometimes, new material may be covered in recitation. Recitation attendance is encouraged but not required.

===Problem Sets and Quizzes===

Each problem set will involve programming in Python. There will be 6 problem sets in the course. There will be two quizzes. All quizzes will be closed-book, though you will be allowed to bring one page of notes to the first quiz and two pages of notes to the second quiz. Pages must be letter-sized, double-sided, either handwritten or typed.

===Grading Policy===

{| class="wikitable"
|+ Grades will be roughly computed as follows:
|-
|ACTIVITIES
|PERCENTAGES
|-
|Problem sets
|30%
|-
|Completion of mandatory finger exercises
|10%
|-
|Midterm Quiz
|20%
|-
|Final Quiz
|40%
|}



Problem sets will be graded out of 10 points. Submissions that do not run will receive at most 20% of the points. Please contact your Teaching Assistant if you have a problem understanding your problem set grade.

Note: Quizzes and finger exercises are not available on OpenCourseWare.


===Extension and Dropping Problem Sets Policy===
We do not grant any extensions. Instead, we offer late days and the option of rolling at most 2 problem set grades into the final quiz score.

===Late Days===

At the beginning of the term, students are given two late days that they can use on problem sets. Starting with Problem Set 1, additional late days can be accumulated for each assignment, one late day for each day the assignment is turned in ahead of the deadline. Up to three late days may be accumulated in this fashion in this course, i.e you can only have a maximum of 3 late days at any point in time. Late days are discrete (a student cannot use half a late day). The staff will keep track of late days and feedback for each problem set will include the number of late days the student has remaining. Any additional late work beyond these late days will not be accepted. To avoid surprises, we suggest that after you submit your problem set, you double check to make sure the submission was uploaded correctly.

===Rolling Over Problem Sets===

Before the final quiz, we will send out an announcement in which you can choose at most 2 problem sets that you can drop. If dropped, the percent that the problem sets are worth will be rolled into the final quiz score. We strongly urge you to see the late days and dropping the problem sets as backup in case of an emergency. Your best strategy is to do the problem sets early before work starts to pile up.

===Calendar===

{| class="wikitable"
|+ Calendar
|-
|SES #
|TOPICS
|ASSIGNMENTS
|-
|1
|What is computation?
|Pset 0 released
|-
|2
|Branching and Iteration
|Pset 1 released
|-
|3
|String Manipulation, Guess and Check, Approximations, Bisection
|Pset 0 due
|-
|4
|Decomposition, Abstractions, Functions
|Pset 2 released
|-
|5
|Tuples, Lists, Aliasing, Mutability, Cloning
|Pset 1 due
|-
|6
|Recursion, Dictionaries
|Pset 3 released
|-
|7
|Testing, Debugging, Exceptions, Assertions
|Pset 2 due; Quiz 1
|-
|8
|Object Oriented Programming
|
|-
|9
|Python Classes and Inheritance
|Pset 3 due; Pset 4 released
|-
|10
|Understanding Program Efficiency, Part 1
|Pset 4 due; Pset 5 released
|-
|11
|Understanding Program Efficiency, Part 2
|
|-
|12
|Searching and Sorting
|Pset 5 due; Final Quiz
|}

</div>
</div>

==Course Materials==

===Downloading Using IPFS===
<code>https://github.com/ipfs/ipfs-desktop/releases</code><br>
[[IPFS_Basics|PFS Basics]]

===Software===
This class is using python3 IDE <b>spyder</b> which is in Anaconda3<br>
https://www.anaconda.com/<br>
How to install is on Problem Set 0<br>

===MIT6_0001F16_Style Guide===
Source:https://ocw.mit.edu/courses/6-0001-introduction-to-computer-science-and-programming-in-python-fall-2016/resources/mit6_0001f16_styleguide/<br>
IPFS:<code>QmUmtyNpSLr2fXwGY1gL2hNnpwbYe8Y7CP2rPwjSNXasxJ</code><br>

==Problem Set 0==
Source:https://ocw.mit.edu/courses/6-0001-introduction-to-computer-science-and-programming-in-python-fall-2016/resources/ps0/<br>
IPFS:<code>QmRWpBvwUNiFRjSvgLjRoiCNXQBBL2aLg55PVfGWw7S1ns</code><br>

==Lecture 1: What is Computation?==

{{#evu:https://www.youtube.com/watch?v=4-CmQesbQvw
|alignment=inline
}}
<br>
Source:https://ocw.mit.edu/courses/6-0001-introduction-to-computer-science-and-programming-in-python-fall-2016/resources/lecture-1-what-is-computation/<br>
IPFS:<code>QmaTdTMxWdz6ySLbx258zQU5McpJTo4ZEVJ63GSKmVEyeM</code><br>

===Glossary===
<div class="toccolours mw-collapsible mw-collapsed">
Glossary for lecture with timestamps:
<div class="mw-collapsible-content">
Time: data<br>
2:10 pset = problem set<br>
12:18 [[Square_root]]<br>
</div>
</div>

===Video transcript===

<div class="toccolours mw-collapsible mw-collapsed">
Video transcript
<div class="mw-collapsible-content">

<pre>
The following content is provided under a Creative
0:03Commons license.
0:04Your support will help MIT OpenCourseWare
0:07continue to offer high-quality, educational resources for free.
0:11To make a donation, or view additional materials
0:13from hundreds of MIT courses, visit MIT OpenCourseWare
0:17at ocw.mit.edu.
0:29ANA BELL: All right.
0:30Let's begin.
0:33As I mentioned before, this lecture
0:35will be recorded for OCW.
0:37Again, in future lectures, if you
0:39don't want to have the back of your head show up,
0:41just don't sit in this front area here.
0:44First of all, wow, what a crowd, you guys.
0:46We're finally in 26-100.
0:486.0001 made it big, huh?
0:52Good afternoon and welcome to the very first class of 6.0001,
0:55and also 600, this semester.
0:58My name is Ana Bell.
1:00First name, Ana.
1:01Last name, Bell.
1:03I'm a lecturer in the EECS Department.
1:06And I'll be giving some of the lectures for today,
1:08along with later on in the term, Professor Eric Grimson, who's
1:13sitting right down there, will be giving some of the lectures,
1:15as well.
1:17Today we're going to go over some basic administrivia,
1:21a little bit of course information.
1:23And then, we're going to talk a little bit
1:24about what is computation?
1:26We'll discuss at a very high level
1:27what computers do just to make sure we're all
1:29on the same page.
1:31And then, we're going to dive right into Python basics.
1:34We're going to talk a little bit about mathematical operations
1:36you can do with Python.
1:38And then, we're going to talk about Python variables
1:40and types.
1:42As I mentioned in my introductory email, all
1:43the slides and code that I'll talk about during lectures
1:46will be up before lecture, so I highly
1:48encourage you to download them and to have them open.
1:52We're going to go through some in-class exercises which will
1:56be available on those slides.
1:57And it's fun to do.
1:59And it's also great if could take notes about the code just
2:07for future reference.
2:09It's true.
2:10This is a really fast-paced course,
2:12and we ramp up really quickly.
2:14We do want to position you to succeed in this course.
2:17As I was writing this, I was trying
2:19to think about when I was first starting
2:21to program what helped me get through my very
2:24first programming course.
2:26And this is really a good list.
2:29The first thing was I just read the psets as soon
2:31as they came out, made sure that the terminology just sunk in.
2:37And then, during lectures, if the lecturer
2:39was talking about something that suddenly I remembered,
2:42oh, I saw that word in the pset and I didn't know what it was.
2:45Well, hey, now I know what it is.
2:46Right?
2:47So just give it a read.
2:48You don't need to start it.
2:51If you're new to programming, I think the key word is practice.
2:55It's like math or reading.
2:57The more you practice, the better you get at it.
3:00You're not going to absorb programming
3:01by watching me write programs because I already know how
3:04to program.
3:05You guys need to practice.
3:07Download the code before lecture.
3:09Follow along.
3:10Whatever I type, you guys can type.
3:12And I think, also, one of the big things
3:14is if you're new to programming, you're
3:16kind of afraid that you're going to break your computer.
3:19And you can't really do that just by running Anaconda
3:24and typing in some commands.
3:26So don't be afraid to just type some stuff in
3:28and see what it does.
3:29Worst case, you just restart the computer.
3:35Yeah.
3:36That's probably the big thing right there.
3:38I should have probably highlighted it,
3:39but don't be afraid.
3:40Great.
3:41So this is pretty much a roadmap of all of 6.0001 or 600
3:46as I've just explained it.
3:47There's three big things we want to get out of this course.
3:51The first thing is the knowledge of concepts,
3:54which is pretty much true of any class that you'll take.
3:56The class will teach you something through lectures.
3:59Exams will test how much you know.
4:02This is a class in programming.
4:05The other thing we want you to get out of it
4:08is programming skills.
4:10And the last thing, and I think this
4:12is what makes this class really great,
4:13is we teach you how to solve problems.
4:16And we do that through the psets.
4:18That's really how I feel the roadmap of this course
4:21looks like.
4:22And underlying all of these is just practice.
4:25You have to just type some stuff away and code a lot.
4:29And you'll succeed in this course, I think.
4:33OK.
4:35So what are the things we're going to learn in this class?
4:38I feel like the things we're going learn in this class
4:41can be divided into basically three different sections.
4:44The first one is related to these first two items here.
4:50It's really about learning how to program.
4:53Learning how to program, part of it
4:55is figuring out what objects to create.
4:58You'll learn about these later.
5:00How do you represent knowledge with data structures?
5:02That's sort of the broad term for that.
5:04And then, as you're writing programs,
5:06you need to-- programs aren't just linear.
5:08Sometimes programs jump around.
5:10They make decisions.
5:11There's some control flow to programs.
5:13That's what the second line is going to be about.
5:18The second big part of this course
5:20is a little bit more abstract, and it
5:24deals with how do you write good code, good style,
5:29code that's readable.
5:30When you write code, you want to write it such
5:33that-- you're in big company, other people will read it,
5:35other people will use it, so it has
5:37to be readable and understandable by others.
5:40To that end, you need to write code
5:41that's well organized, modular, easy to understand.
5:48And not only that, not only will your code
5:50be read by other people, but next year, maybe,
5:53you'll take another course, and you'll
5:55want to look back at some of the problems
5:56that you wrote in this class.
5:58You want to be able to reread your code.
6:00If it's a big mess, you might not be able to understand--
6:03or reunderstand-- what you were doing.
6:06So writing readable code and organizing code
6:08is also a big part.
6:10And the last section is going to deal with-- the first two
6:15are actually part of the programming in Introduction
6:19to Programming and Computer Science in Python.
6:21And the last one deals mostly with the computer science part
6:26in Introduction to Programming and Computer Science in Python.
6:29We're going to talk about, once you have learned
6:31how to write programs in Python, how do
6:33you compare programs in Python?
6:35How do you know that one program is better than the other?
6:38How do you know that one program is
6:39more efficient than the other?
6:41How do you know that one algorithm
6:42is better than the other?
6:45That's what we're going to talk about in the last part
6:47of the course.
6:48OK.
6:50That's all for the administrative part
6:52of the course.
6:54Let's start by talking at a high level what does a computer do.
6:59Fundamentally, it does two things.
7:03One, performs calculations.
7:05It performs a lot of calculations.
7:07Computers these days are really, really fast,
7:09a billion calculations per second is probably not far off.
7:15It performs these calculations and it
7:16has to store them somewhere.
7:18Right?
7:19Stores them in computer memory.
7:21So a computer also has to remember results.
7:24And these days, it's not uncommon to find computers
7:26with hundreds of gigabytes of storage.
7:30The kinds of calculations that computers do,
7:34there are two kinds.
7:35One are calculations that are built into the language.
7:37These are the very low level types
7:39of calculations, things like addition,
7:41subtraction, multiplication, and so on.
7:45And once you have a language that
7:47has these primitive calculation types, you, as a programmer,
7:53can put these types together and then define
7:55your own calculations.
7:57You can create new types of calculations.
8:00And the computer will be able to perform those, as well.
8:04I think, one thing I want to stress--
8:07and we're going to come back to this
8:09again during this entire lecture, actually--
8:12is computers only know what you tell them.
8:15Computers only do what you tell them to do.
8:18They're not magical.
8:19They don't have a mind.
8:22They just know how to perform calculations really,
8:24really quickly.
8:26But you have to tell them what calculations to do.
8:32Computers don't know anything.
8:34All right.
8:35We've come to that.
8:40Let's go into the types of knowledge.
8:44The first type of knowledge is declarative knowledge.
8:48And those are things like statements of fact.
8:50And this is where my email came into play.
8:53If you read it all the way to the bottom,
8:55you would have entered a raffle.
8:57So a statement of fact for today's lecture
8:59is, someone will win a prize before class ends.
9:03And the prize was a Google Cardboard.
9:06Google state-of-the-art virtual reality glasses.
9:09And I have them right here.
9:14Yea.
9:15I delivered on my promise.
9:18That's a statement of fact.
9:20So pretend I'm a machine.
9:22OK?
9:23I don't know anything except what you tell me.
9:26I don't know.
9:28I know that you tell me this statement.
9:30I'm like, OK.
9:31But how is someone going to win a Google Cardboard
9:33before class ends, right?
9:35That's where imperative knowledge comes in.
9:37Imperative knowledge is the recipe, or the how-to,
9:39or the sequence of steps.
9:42Sorry.
9:43That's just my funny for that one.
9:47So the sequence of steps is imperative knowledge.
9:53If I'm a machine, you need to tell me
9:57how someone will win a Google Cardboard before class.
10:00If I follow these steps, then technically,
10:02I should reach a conclusion.
10:06Step one, I think we've already done that.
10:08Whoever wanted to sign up has signed up.
10:11Now I'm going to open my IDE.
10:13I'm just basically being a machine
10:14and following the steps that you've told me.
10:17The IDE that we're using in this class is called Anaconda.
10:21I'm just scrolling down to the bottom.
10:25Hopefully, you've installed it in problem set zero.
10:28I've opened my IDE.
10:30I'm going to follow the next set of instructions.
10:34I'm going to choose a random number between the first
10:36and the nth responder.
10:39Now, I'm going to actually use Python to do this .
10:42And this is also an example of how just
10:44a really simple task in your life,
10:46you can use computers or programming to do that.
10:48Because if I chose a random number,
10:50I might be biased because, for example,
10:51I might like the number 8.
10:53To choose a random number, I'm going to go and say, OK,
10:57where's the list of responders?
10:58It starts at 15.
10:59Actually, it starts at 16 because that's me.
11:03We're going to choose a random number between 16
11:05and the end person 266.
11:09Oh, we just got-- oh.
11:11OK.
11:13OK.
11:13I'm going to cut it off right here.
11:15271.
11:15OK.
11:1616 and 271.
11:18Perfect.
11:19OK.
11:20I'm going to choose a random number.
11:21I'm going to go to my IDE.
11:22And you don't need to know how to do this yet,
11:24but by the end of this class, you will.
11:26I'm just going to use Python.
11:29I'm just going to get the random number package that's going
11:31to give me a random number.
11:32I'm going to say random.randint.
11:35And I'm going to choose a random number between 16 and 272,
11:40OK.
11:4175.
11:42OK.
11:43Great.
11:44I chose a random number.
11:45And I'm going to find the number in the responder's sheet.
11:48What was the number again?
11:49Sorry.
11:5175.
11:52OK.
11:54Up we go.
11:56There we go.
11:57Lauren Z-O-V. Yeah.
12:01Nice.
12:02You're here.
12:14Awesome.
12:16All right.
12:17That's an example of me being a machine and also,
12:21at the same time, using Python in my everyday life,
12:23just lecturing, to find a random number.
12:28Try to use Python wherever you can.
12:30And that just gives you practice.
12:34That was fun.
12:35But we're at MIT.
12:37We're MIT students.
12:39And we love numbers here at MIT.
12:41Here's a numerical example that shows
12:44the difference between declarative and imperative
12:46knowledge.
12:50An example of declarative knowledge
12:51is the square root of a number x is y such that y times y
12:54is equal to x.
12:57That's just a statement of fact It's true.
13:02Computers don't know what to do with that.
13:05They don't know what to do with that statement.
13:07But computers do know how to follow a recipe.
13:11Here's a well-known algorithm.
13:13To find the square root of a number x,
13:16let's say x is originally 16, if a computer follows
13:23this algorithm, it's going to start with a guess, g,
13:26let's say, 3.
13:28We're trying to find the square root of 16.
13:30We're going to calculate g times g is 9.
13:34And we're going to ask is if g times g
13:36is close enough to x, then stop and say, g is the answer.
13:39I'm not really happy with 9 being really close to 16.
13:42So I'm going to say, I'm not stopping here.
13:44I'm going to keep going.
13:47If it's not close enough, then I'm
13:48going to make a new guess by averaging g and x over g.
13:52That's x over g here.
13:54And that's the average over there.
13:57And the new average is going to be my new guess.
14:04And that's what it says.
14:05And then, the last step is using the new guess,
14:07repeat the process.
14:08Then we go back to the beginning and repeat the whole process
14:11over and over again.
14:13And that's what the rest of the rows do.
14:15And you keep doing this until you decide
14:16that you're close enough.
14:23What we saw for the imperative knowledge
14:25in the previous numerical example
14:26was the recipe for how to find the square root of x.
14:31What were the three parts of the recipe?
14:33One was a simple sequence of steps.
14:36There were four steps.
14:39The other was a flow of control, so there were
14:42parts where we made decisions.
14:45Are we close enough?
14:46There were parts where we repeated some steps.
14:49At the end, we said, repeat steps 1, 2, 3.
14:52That's the flow of control.
14:55And the last part of the recipe was a way to stop.
14:58You don't want a program that keeps going and going.
15:00Or for a recipe, you don't want to keep baking bread forever.
15:03You want to stop at some point.
15:05Like 10 breads is enough, right?
15:07So you have to have a way of stopping.
15:10In the previous example, the way of stopping
15:12was that we decided we were close enough.
15:15Close enough was maybe being within .01, .001,
15:20whatever you pick.
15:23This recipe is there for an algorithm.
15:26In computer science speak, it's going to be an algorithm.
15:29And that's what we're going to learn about in this class.
15:34We're dealing with computers.
15:35And we actually want to capture a recipe
15:37inside a computer, a computer being a mechanical process.
15:49Historically, there were two different types of computers.
15:55Originally, there were these things
15:57called fixed-program computers.
15:59And I'm old enough to have used something
16:02like this, where there's just numbers and plus, minus,
16:06multiplication, divide, and equal.
16:08But calculators these days are a lot more complicated.
16:11But way back then, an example of a fixed-program computer
16:15is this calculator.
16:16It only knows how to do addition, multiplication,
16:19subtraction, division.
16:20If you want to plot something, you can't.
16:22If you want to go on the internet, send email with it,
16:27you can't.
16:27It can only do this one thing.
16:31And if you wanted to create a machine that did another thing,
16:33then you'd have to create another fixed-program computer
16:37that did a completely separate test.
16:39That's not very great.
16:41That's when stored-program computers came into play.
16:45And these were machines that could store
16:47a sequence of instructions.
16:50And these machines could execute the sequence of instructions.
16:54And you could change the sequence of instructions
16:56and execute this different sequence of instructions.
17:00You could do different tasks in the same machine.
17:03And that's the computer as we know it these days.
17:07The central processing unit is where all of these decisions
17:11get made.
17:11And these are all the peripherals.
17:16The basic machine architecture-- at the heart of every computer
17:20there's just this basic architecture--
17:25and it contains, I guess, four main parts.
17:28The first is the memory.
17:31Input and output is the other one.
17:34The ALU is where all of the operations are done.
17:39And the operations that the ALU can do
17:41are really primitive operations, addition, subtraction,
17:44and so on.
17:46What the memory contains is a bunch of data
17:52and your sequence of instructions.
18:00Interacting with the Arithmetic Logic Unit is the Control Unit.
18:03And the Control Unit contains one program counter.
18:07When you load a sequence of instructions,
18:09the program counter starts at the first sequence.
18:15It starts at the sequence, at the first instruction.
18:18It gets what the instruction is, and it sends it to the ALU.
18:22The ALU asks, what are we doing operations on here?
18:25What's happening?
18:27It might get some data.
18:29If you're adding two numbers, it might get two numbers
18:31from memory.
18:33It might do some operations.
18:34And it might store data back into memory.
18:37And after it's done, the ALU is going to go back,
18:41and the program counter is going to increase
18:43by 1, which means that we're going
18:45to go to the next sequence in the instruction set.
18:50And it just goes linearly, instruction by instruction.
18:53There might be one particular instruction
18:56that does some sort of test.
18:58It's going to say, is this particular value
19:07greater or equal to or the same as this other particular value?
19:11That's a test, an example of a test.
19:13And the test is going to either return true or false.
19:17And depending on the result of that test,
19:20you might either go to the next instruction,
19:24or you might set the program counter
19:26to go all the way back to the beginning, and so on.
19:29You're not just linearly stepping
19:32through all the instructions.
19:33There might be some control flow involved,
19:35where you might skip an instruction,
19:36or start from the beginning, or so on.
19:39And after you're done, when you finished
19:42executing the last instruction, then you
19:44might output something.
19:47That's really the basic way that a computer works.
19:53Just to recap, you have the stored program computer
19:55that contains these sequences of instructions.
19:59The primitive operations that it can do
20:00are addition, subtraction, logic operations, tests--
20:06which are something equal to something else, something
20:08less than, and so on-- and moving data,
20:10so storing data, moving data around, and things like that.
20:14And the interpreter goes through every instruction
20:19and decides whether you're going to go to the next instruction,
20:22skip instructions, or repeat instructions, and so on.
20:28So we've talked about primitives.
20:30And in fact, Alan Turing, who was a really great computer
20:35scientist, he showed that you can compute anything
20:37using the six primitives.
20:38And the six primitives are move left, move right, read, write,
20:46scan, and do nothing.
20:49Using those six instructions and the piece of tape,
20:54he showed that you can compute anything.
20:57And using those six instructions,
21:00programming languages came about that
21:03created a more convenient set of primitives.
21:05You don't have to program in only these six commands.
21:11And one interesting thing, or one really important thing,
21:16that came about from these six primitives
21:19is that if you can compute something in Python,
21:22let's say-- if you write a program that computes something
21:25in Python, then, in theory, you can
21:28write a program that computes the exact same thing
21:31in any other language.
21:32And that's a really powerful statement.
21:36Think about that today when you review your slides.
21:39Think about that again.
21:40That's really powerful.
21:45Once you have your set of primitives
21:49for a particular language, you can start creating expressions.
21:53And these expressions are going to be
21:55combinations of the primitives in the programming language.
22:00And the expressions are going to have some value.
22:02And they're going up some meaning in the programming
22:05language.
22:08Let's do a little bit of a parallel with English
22:10just so you see what I mean.
22:14In English, the primitive constructs
22:15are going to be words.
22:17There's a lot of words in the English language.
22:19Programming languages-- in Python, there are primitives,
22:23but there aren't as many of them.
22:25There are floats, Booleans, these
22:28are numbers, strings, and simple operators,
22:31like addition, subtraction, and so on.
22:35So we have primitive constructs.
22:38Using these primitive constructs,
22:39we can start creating, in English, phrases, sentences,
22:48and the same in programming languages.
22:49In English, we can say something like, "cat, dog, boy.
22:54That, we say, is not syntactically valid.
22:58That's bad syntax.
23:00That's noun, noun, noun.
23:01That doesn't make sense.
23:05What does have good syntax in English is noun, verb, noun.
23:08So, "cat, hugs boy" is syntactically valid.
23:12Similarly, in a programming language,
23:14something like this-- in Python, in this case-- a word
23:18and then the number five doesn't really make sense.
23:20It's not syntactically valid.
23:22But something like operator, operand, operator is OK.
23:28So once you've created these phrases, or these expressions,
23:34that are syntactically valid, you
23:37have to think about the static semantics of your phrase,
23:41or of your expression.
23:45For example, in English, "I are hungry" is good syntax.
23:51But it's weird to say.
23:55We have a pronoun, a verb, and an adjective, which
23:58doesn't really make sense.
23:59"I am hungry" is better.
24:03This does not have good static semantics.
24:07Similarly, in programming languages--
24:09and you'll get the hang of this the more
24:11you do it-- something like this, "3.2 times 5, is OK.
24:15But what does it mean?
24:17What's the meaning to have a word added to a number?
24:22There's no meaning behind that.
24:25Its syntax is OK, because you have
24:28operator, operand, operator.
24:30But it doesn't really make sense to add a number to a word,
24:32for example.
24:36Once you have created these expressions that
24:39are syntactically correct and static, semantically correct,
24:44in English, for example, you think about the semantics.
24:48What's the meaning of the phrase?
24:50In English, you can actually have more than one
24:52meaning to an entire phrase.
24:56In this case, "flying planes can be dangerous"
25:01can have two meanings.
25:02It's the act of flying a plane is dangerous,
25:04or the plane that is in the air is dangerous.
25:08And this might be a cuter example.
25:10"This reading lamp hasn't uttered a word
25:12since I bought it.
25:13What's going on?"
25:15So that has two meanings.
25:16It's playing on the word "reading lamp."
25:21That's in English.
25:21In English, you can have a sentence
25:23that has more than one meaning, that's
25:25syntactically correct and static, semantically correct.
25:28But in programming languages, the program that you write,
25:31the set of instructions that you write, only has one meaning.
25:34Remember, we're coming back to the fact
25:35that the computer only does what you tell it to do.
25:40It's not going to suddenly decide
25:42to add another variable for some reason.
25:46It's just going to execute whatever statements you've
25:49put up.
25:50In programming languages, there's only one meaning.
25:52But the problem that comes into play in programming languages
25:58is it's not the meaning that you might have
25:59intended, as the programmer.
26:03That's where things can go wrong.
26:05And there's going to be a lecture
26:07on debugging a little bit later in the course.
26:10But this is here just to tell you
26:12that if you see an error pop up in your program,
26:16it's just some text that says, error.
26:21For example, if we do something like this,
26:28this is syntactically correct.
26:30Incorrect.
26:31Syntactically incorrect.
26:32See?
26:32There's some angry text right here.
26:36What is going on?
26:37The more you program, the more you'll
26:39get the hang of reading these errors.
26:41But this is basically telling me the line
26:43that I wrote is syntactically incorrect.
26:45And it's pointing to the exact line and says, this is wrong,
26:49so I can go back and fix it as a programmer.
26:55Syntax errors are actually really easily caught by Python.
27:00That was an example of a syntax error.
27:02Static semantic errors can also be
27:04caught by Python as long as, if your program has some decisions
27:09to make, as long as you've gone down the branch where
27:13the static semantic error happens.
27:18And this is probably going to be the most frustrating one,
27:22especially as you're starting out.
27:23The program might do something different than what
27:25you expected it to do.
27:27And that's not because the program suddenly-- for example,
27:32you expected the program to give you an output of 0
27:34for a certain test case, and the output that you got was 10.
27:37Well, the program didn't suddenly
27:39decide to change its answer to 10.
27:42It just executed the program that you wrote.
27:48That's the case where the program gave you
27:50a different answer than expected.
27:53Programs might crash, which means they stop running.
27:55That's OK.
27:57Just go back to your code and figure out what was wrong.
28:00And another example of a different meaning
28:03than what you intended was maybe the program won't stop.
28:06It's also OK.
28:07There are ways to stop it besides restarting
28:10the computer.
28:12So then Python programs are going
28:17to be sequences of definitions and commands.
28:20We're going to have expressions that are going to be evaluated
28:25and commands that tell the interpreter to do something.
28:33If you've done problem set 0, you'll
28:35see that you can type commands directly
28:37in the shell here, which is the part on the right where
28:40I did some really simple things, 2 plus 4.
28:44Or you can type commands up in here, on the left-hand side,
28:49and then run your program.
28:52Notice that, well, we'll talk about this-- I
28:54won't talk about this now.
28:55But these are-- on the right-hand side, typically,
28:59you write very simple commands just if you're
29:01testing something out.
29:03And on the left-hand side here in the editor,
29:04you write more lines and more complicated programs.
29:15Now we're going to start talking about Python.
29:18And in Python, we're going to come back to this,
29:20everything is an object.
29:23And Python programs manipulate these data objects.
29:27All objects in Python are going to have a type.
29:30And the type is going to tell Python the kinds of operations
29:34that you can do on these objects.
29:37If an object is the number five, for example,
29:39you can add the number to another number,
29:42subtract the number, take it to the power of something,
29:45and so on.
29:47As a more general example, for example, I am a human.
29:51So that's my type.
29:52And I can walk, speak English, et cetera.
29:55Chewbacca is going to be a type Wookie.
29:59He can walk, do that sound that I can't do.
30:02He can do that, but I can't.
30:04I'm not even going to try, and so on.
30:09Once you have these Python objects,
30:11everything is an object in Python.
30:14There are actually two types of objects.
30:16One are scalar objects.
30:18That means these are very basic objects in Python from which
30:21everything can be made.
30:24These are scalar objects.
30:26That can't be subdivided.
30:28The other type of object is a non-scalar object.
30:31And these are objects that have some internal structure.
30:33For example, the number five is a scalar
30:36object because it can't be subdivided.
30:39But a list of numbers, for example, 5, 6,
30:417,8, is going to be a non-scalar object
30:45because you can subdivide it.
30:46You can subdivide it into-- you can find parts to it.
30:53It's made up of a sequence of numbers.
30:58Here's the list of all of the scalar objects in Python.
31:01We have integers, for example, all of the whole numbers.
31:05Floats, which are all of the real numbers, anything
31:10with a decimal.
31:11Bools are Booleans.
31:13There's only two values to Booleans.
31:16That's True and False.
31:18Note the capitalization, capital T and capital F.
31:23And this other thing called NoneType.
31:24It's special.
31:26It has only one value called None.
31:28And it represents the absence of a type.
31:30And it sometimes comes in handy for some programs.
31:34If you want to find the type of an object,
31:36you can use this special command called type.
31:39And then in the parentheses, you put down
31:41what you want to find the type of.
31:44You can write into the shell "type of 5,"
31:47and the shell will tell you, that's an integer.
31:52If you happen to want to convert between two different types,
31:56Python allows you to do that.
31:58And to do that, you put the type that you
32:01want to convert to right before the object
32:03that you want to convert to.
32:05So float(3) will convert the integer 3 to the float 3.0.
32:12And similarly, you can convert any float into an integer.
32:16And converting to an integer just truncates.
32:20It just takes away the decimal and whatever's
32:22after it-- it does not round-- and keeps just the integer
32:26part.
32:30For this slide, I'm going to talk about it.
32:31But if you'd like if you have the slides up,
32:35go to go to this exercise.
32:37And after I'm done talking about the slide,
32:41we'll see what people think for that exercise.
32:45One of the most important things that you
32:47can do in basically any programming,
32:51in Python also, is to print things out.
32:55Printing out is how you interact with the user.
33:00To print things out, you use the print command.
33:04If you're in the shell, if you simply type "3 plus 2,"
33:07you do see a value here.
33:09Five, right?
33:11But that's not actually printing something out.
33:13And that becomes apparent when you actually
33:18type things into the editor.
33:19If you just do "3 plus 2," and you run the program-- that's
33:23the green button here-- you see on the right-hand side here,
33:26it ran my program.
33:27But it didn't actually print anything.
33:30If you type this into the console,
33:32it does show you this value, but that's
33:33just like peeking into the value for you as a programmer.
33:39It's not actually printing it out to anyone.
33:41If you want to print something out,
33:42you have to use the print statement like that.
33:47In this case, this is actually going to print this number
33:50five to the console.
33:58That's basically what it says.
33:59It just tells you it's an interaction within the shell
34:01only.
34:02It's not interacting with anyone else.
34:04And if you don't have any "Out," that
34:06means it got printed out to the console.
34:09All right.
34:09We talked a little bit about objects.
34:13Once you have objects, you can combine objects and operators
34:16to form these expressions.
34:17And each expression is going to have a value.
34:19So an expression evaluates to a value.
34:22The syntax for an expression is going
34:24to be object, operator, object, like that.
34:30And these are some operators you can do on ints and floats.
34:34There's the typical ones, addition, subtraction,
34:36multiplication, and division.
34:38If, for the first three, the answer
34:43that you get-- the type of the answer that you get--
34:45is going to depend on the type of your variables.
34:48If both of the variables of the operands are integers,
34:52then the result you're going to get is of type integer.
34:55But if at least one of them is a float, then
34:56the result you're going to get is a float.
34:58Division is a little bit special in that
35:02no matter what the operands are, the result
35:04is always going to be a float.
35:09The other operations you can do, and these are also useful,
35:14are the remainder, so the percent sign.
35:19If you use the percent sign between two operands,
35:22that's going to give you the remainder when you divide i
35:25by j.
35:28And raising something to the power of something else
35:30is using the star star operator.
35:32And i star stars j is going to take i to the power of j.
35:41These operations have the typical precedence
35:43that you might expect in math, for example.
35:47And if you'd like to put precedence
35:49toward some other operations, you
35:50can use parentheses to do that.
36:01All right.
36:03So we have ways of creating expressions.
36:07And we have operations we can do on objects.
36:13But what's going to be useful is to be able to save values
36:19to some name.
36:21And the name is going to be something that you pick.
36:24And it should be a descriptive name.
36:27And when you save the value to a name,
36:32you're going to be able to access that value later
36:36on in your program.
36:37And that's very useful.
36:40To save a value to a variable name, you use the equal sign.
36:49And the equal sign is an assignment.
36:51It assigns the right-hand side, which
36:53is a value, to the left-hand side, which
36:55is going to be a variable name.
36:59In this case, I assigned the float 3.14159
37:03to the variable pi.
37:05And in the second line, I'm going
37:08to take this expression, 22 divided by 7,
37:10I'm going to evaluate it.
37:13It's going to come up with some decimal number.
37:16And I'm going to save it into the variable pi_approx.
37:19values are stored in memory.
37:21And this assignment in Python, we
37:22say the assignment binds the name to the value.
37:26When you use that name later on in your program,
37:30you're going to be referring to the value in memory.
37:35And if you ever want to refer to the value
37:37later on in your code, you just simply type
37:39the name of the variable that you've assigned it to.
37:44So why do we want to give names to expressions?
37:48Well, you want to reuse the names instead of the values.
37:51And it makes your code look a lot nicer.
37:54This is a piece of code that calculates
37:56the area of a circle.
37:59And notice, I've assigned a variable pi to 3.14159.
38:03I've assigned another variable called radius to be 2.2.
38:07And then, later on in my code, I have another line
38:09that says area-- this is another variable-- is
38:12equal to-- this is an assignment--
38:15to this expression.
38:17And this expression is referring to these variable names, pi
38:23and radius.
38:24And it's going look up their values in memory.
38:26And it's going to replace these variable names
38:29with those values.
38:30And it's going to do the calculation for me.
38:32And in the end, this whole expression
38:34is going to be replaced by one number.
38:36And it's going to be the float.
38:40Here's another exercise, while I'm talking about the slide.
38:45I do want to make a note about programming versus math.
38:49In math, you're often presented with a problem
38:55that says, solve for x.
38:57x plus y is equal to something something.
39:00Solve for x, for example.
39:03That's coming back to the fact that computers don't
39:09know what to do with that.
39:10Computers need to be told what to do.
39:12In programming, if you want to solve for x,
39:14you need to tell the computer exactly how to solve for x.
39:18You need to figure out what formula
39:20you need to give the computer in order to be
39:22able to solve for x.
39:25That means always in programming the right-hand side is
39:29going to be an expression.
39:33It's something that's going to be evaluated to a value.
39:35And the left-hand side is always a variable.
39:39It's going to be an assignment.
39:40The equal sign is not like in math
39:43where you can have a lot of things to the left
39:45and a lot of things to the right of the equal sign.
39:47There's only one thing to the left of the equal sign.
39:49And that's going to be a variable.
39:50An equal sign stands for an assignment.
39:53Once we've created expressions, and we have these assignments,
39:57you can rebind variable names using new assignment
39:59statements.
40:03Let's look at an example for that.
40:05Let's say this is our memory.
40:07Let's type back in the example with finding the radius.
40:13Let's say, pi is equal to 3.14.
40:19In memory, we're going to create this value 3.14.
40:22We're going to bind it to the variable named pi.
40:28Next line, radius is equal to 2.2.
40:31In memory, we're creating this value 2.2.
40:35And we're going to bind it to the variable named radius.
40:40Then we have this expression here.
40:44It's going to substitute the values for pi
40:46from memory and the value for radius from memory.
40:49It's going to calculate the value that this expression
40:54evaluates to.
40:56It's going to pop that into the memory.
40:57And it's going to assign-- because we're
40:59using the equal sign-- it's going
41:01to assign that value to that variable area.
41:08Now, let's say we rebind radius to be something else.
41:14Radius i is bound to the value 2.2.
41:21But when we do this line, radius is equal to radius plus 1,
41:24we're going to take away the binding to 2.2.
41:27We're going to do this calculation.
41:29The new value is 3.2.
41:31And we're going to rebind that value to that same variable.
41:38In memory, notice we're still going
41:40to have this value, 2.2, floating around.
41:43But we've lost the handle for it.
41:46There's no way to get it back.
41:48It's just in memory sitting there.
41:52At some point, it might get collected by what
41:55we call the garbage collector.
41:56In Python, And it'll retrieve these lost values,
42:00and it'll reuse them for new values, and things like that.
42:05But radius now points to the new value.
42:08We can never get back 2.2.
42:13And that's it.
42:16The value of area-- notice, this is very important.
42:18The value of area did not change.
42:23And it did not change because these are all the instructions
42:26we told the computer to do.
42:28We just told it to change radius to be radius plus 1.
42:33We never told it to recalculate the value of area.
42:37If I copied that line down here, then the value of area
42:41would change.
42:42But we never told it to do that.
42:44The computer only does what we tell it to do.
42:46That's the last thing.
42:47Next lecture, we're going to talk about adding control
42:51flow to our programs, so how do you tell the computer
42:53to do one thing or another?
42:55All right.
</pre>
</div>
</div>

===Lecture Notes - lecture 1 py===
Source: https://ocw.mit.edu/courses/6-0001-introduction-to-computer-science-and-programming-in-python-fall-2016/920cc911b6eb5747f2ccd431bbc4306b_lec1.py<br>
<div class="toccolours mw-collapsible mw-collapsed">
lecture 1 py
<div class="mw-collapsible-content">
<pre>
pi = 3.14159
radius = 2.2
# area of circle equation <- this is a comment
area = pi*(radius**2)
print(area)

# change values of radius <- another comment
# use comments to help others understand what you are doing in code
radius = radius + 1
print(area)     # area doesn't change
area = pi*(radius**2)
print(area)


#############################
#### COMMENTING LINES #######
#############################
# to comment MANY lines at a time, highlight all of them then CTRL+1
# do CTRL+1 again to uncomment them
# try it on the next few lines below!

#area = pi*(radius**2)
#print(area)
#radius = radius + 1
#area = pi*(radius**2)
#print(area)

#############################
#### AUTOCOMPLETE #######
#############################
# Spyder can autocomplete names for you
# start typing a variable name defined in your program and hit tab 
# before you finish typing -- try it below

# define a variable
a_very_long_variable_name_dont_name_them_this_long_pls = 0

# below, start typing a_ve then hit tab... cool, right!
# use autocomplete to change the value of that variable to 1

# use autocomplete to write a line that prints the value of that long variable
# notice that Spyder also automatically adds the closed parentheses for you!
</pre>
</div>
</div>

===pdf-Slides for Lecture 1===
Source:https://ocw.mit.edu/courses/6-0001-introduction-to-computer-science-and-programming-in-python-fall-2016/resources/mit6_0001f16_lec1/<br>
IPFS:<code>QmemB25bVuN2fuiAq3JaDM4J5MYit6HfCCsU3EFTWL7wpF</code><br>


===Problem Set 1===
Source:https://ocw.mit.edu/courses/6-0001-introduction-to-computer-science-and-programming-in-python-fall-2016/resources/mit6_0001f16_ps1/<br>
IPFS:<code>QmbxaDU9U4hquK4Dhb365nD5qG5eEFUM6NABqXRaux6tRB</code><br>

===Additional Python Resources ===
Source:https://ocw.mit.edu/courses/6-0001-introduction-to-computer-science-and-programming-in-python-fall-2016/resources/mit6_0001f16_additional/<br>
IPFS:<code>QmYWPVdHEbhmdFXNR9R46ey5eykyFPeCZ1joXE6z28L1VB</code><br>

<div class="toccolours mw-collapsible mw-collapsed">
Additional Python Resources:
<div class="mw-collapsible-content">
If you're having trouble with a particular concept or simply want to have access to more
information, try one of the following links.

====DOCUMENTATION====
* [[https://docs.python.org/3/library/index.html Official Python 3 Documentation]] - "official"/technical explanation of what a particular function/operator
does, examples of correct syntax, what the various libraries are, etc.

====TEXTBOOKS/TUTORIALS====
* [[https://diveintopython3.net/ Dive Into Python]] - another survey of Python syntax, datatypes, etc.
* [[http://greenteapress.com/wp/think-python-2e/ Think Python by Allen Downey]] - a good general overview of the Python language. Includes exercises.
* [[https://docs.python.org/3/tutorial/ The Official Python Tutorial]] - self-explanatory
* [[https://learnpythonthehardway.org/book/ Learn Python the Hard Way]] - (note: for Python 2) another free online text
* [[https://docs.python.org/3.0/reference/lexical_analysis.html#id8 Reserved Keywords in Python]] - don't use these as variable names
* [[https://peps.python.org/pep-0008/ PEP 8 - Style Guide for Python Code]] - learn what is good and bad style in Python
* [[https://checkio.org/ CheckIO]] - learn Python by exploring a game world
* [[https://inventwithpython.com/ Invent with Python]] - develop your Python skills by making games or hacking ciphers
* [[https://www.codecademy.com/catalog Codecademy]] - (note: for Python 2) learn Python by building web apps and manipulating data; interactive
tutorial sequence
* [[https://pythontutor.com Python Tutor]] - interactive tutorial sequence of exercises

====DEBUGGING====
* [[https://pythontutor.com/ Python Tutor]] - an excellent way to actually visualize how the interpreter actually reads and executes
your code
* [[https://www.diffchecker.com/ DiffChecker]] - compares two sets of text and shows you which lines are different
* [[https://pythonconquerstheuniverse.wordpress.com/2009/09/10/debugging-in-python/ Debugging in Python]] - steps you can take to try to debug your program

====OTHER Q&A====
* [[https://stackoverflow.com/questions/tagged/python Stack Overflow]] - a large Q&A forum for programming concepts (not just Python). Try searching here
before you post on the edX forum, and you may find that someone has already answered your question.

====MORE PRACTICE PROBLEMS====
* [[http://www.pythonchallenge.com/ Python Challenge]] - a series of puzzles you can try to test your Python abilities
* [[https://projecteuler.net/ Project Euler]] - additional programming challenges you can try once your Python knowledge becomes
stronger; problems are sorted by increasing difficulty
* [[https://codingbat.com/python Coding Bat]] - problems you can solve within an online interpreter
* [[https://www.codewars.com/?language=python Codewars]] - improve your skills by training on real code challenges

MIT OpenCourseWare
https://ocw.mit.edu
6.0001 Introduction to Computer Science and Programming in Python
Fall 2016
For information about citing these materials or our Terms of Use, visit: https://ocw.mit.edu/terms.

</div>
</div>

==2==
mit-test-course/2/MIT6_0001F16_Lecture_02_300k.mp4<br>
https://ipfs.io/ipfs/QmTFdkMJnzUcwgs1hdoF7qtADE2NqTJVaF9CfgULbzSuA9<br>
<code>QmTFdkMJnzUcwgs1hdoF7qtADE2NqTJVaF9CfgULbzSuA9</code> <br>
<br>
mit-test-course/2/ba2947b25b1580e4a84df0ec5dbe5cdd_MIT6_0001F16_Lec2.pdf<br>
https://ipfs.io/ipfs/QmNiZvEh6UmpHLTxw4saN7WdojzBokp2JCbucYzrekoQBK<br>
<code>QmNiZvEh6UmpHLTxw4saN7WdojzBokp2JCbucYzrekoQBK</code><br> 
<br>
mit-test-course/2/d6ee838ee4c85ace93a4e170cfd83c03_lec2_branch_loops.py<br>
https://ipfs.io/ipfs/QmPjEzEu56mqeE19Vth9AkDbAxz7wAWg9zMVvF9FZ1UBvK<br>
<code>QmPjEzEu56mqeE19Vth9AkDbAxz7wAWg9zMVvF9FZ1UBvK</code><br>
<br>

==3==

MIT6_0001F16_Lecture_03_300k.mp4<br>
<code>QmTTCsuhbnjXWuigZLSgKAt4DjFsm78MANo3KUMGcK98s1</code><br>
<br>
88de925a1fb925e46a08bc5f34d029bd_lec3_strings_algos.py<br>
<code>QmYppDgGMptihHA7ixFw2GHvspN8Bw1HY21HtUpQNxi23i</code><br>
<br>
b9b9a82a29e8746db1facfbd30c07940_MIT6_0001F16_Lec3.pdf<br>
<code>QmP2AZfUx8RTqCGamJtPyodFU8dHG8QrBHYKkP79YepEe9</code><br>

==4==

MIT6_0001F16_Lecture_04_300k.mp4<br>
<code>QmQuc5zpaJdMfRYxTLyZc5DQuota1FjuJiqgWf8ctGmRsU</code><br>
<br>
6ba59859535f1566dd57a7279aeba5d1_MIT6_0001F16_Lec4.pdf<br>
<code>QmP1p4h21ogMxWeeX2PiDibQbHqWer7ABCsMrfMxEx7QBW</code><br>
<br>
9e8439a27af18817e046ac37333d03f6_lec4_functions.py<br>
<code>QmNtPQncXMYNBnX4NoNfx2ifetrfvrATamdrsjx4u9iQ7c</code><br>

==5==
MIT6_0001F16_Lecture_05_300k.mp4<br>
<code>Qmco5sKKQfnWUNP9ZUxLkDhoV6jfjv8L4AdzES7En41AzP</code><br> 
<br>
1776670e271578eeb99fc25975f20586_MIT6_0001F16_Lec5.pdf<br>
<code>QmSdxg2inPbK1FSynNdPUka6CUZtEGG6sdPZgxaAgb46GE</code><br> 
<br>
cdf5f8e7f109952655f4d253ed955555_lec5_tuples_lists.py<br>
<code>QmThDori5ETa3U27DFpndU7RmsLgG7zjpqGVxAncCupSuc</code><br>

==6==
<br>MIT6_0001F16_Lecture_06_300k.mp4<br>
<code>QmVzK3PVETv69Y27UKDfaQQM5um8ByMdYQS3TzD2EkoR42</code><br>
<br>876348c652c5353daccc96e1b7d577bb_MIT6_0001F16_Lec6.pdf<br>
<code>QmQAqSGJAeoypUMyUnb7hRrziDyRAwymcTGdcaydT5i73s</code><br>
<br>706228e592761d9c7c1c073f8ba7a6cc_lec6_recursion_dictionaries.py<br>
<code>QmaGhNYnR5yUMYZf4q7qLsNwEW6B7pbLbgJokJBTNSA2FT</code><br>

==7==
<br>MIT6_0001F16_Lecture_07_300k.mp4<br>
<code>QmUyiqpAUA91w4Xm2Dz2wPr6kE6wTzA1apwJziTdBysRLw</code><br>
<br>
51bdde43dfd773ba20747ce5d89119ac_MIT6_0001F16_Lec7.pdf<br>
<code>QmcqZoeVrsfBv4Ri6M8KtiLdy3VpKnyznDFhX8zvfd3Qrs</code><br>
<br>
abdd1d61892ccce9be2ad84e52004e07_lec7_debug_except.py<br>
<code>QmeVKCB6ponYr4f72MuNwegukX9t42NTywNHpDPgyNi9ae</code><br>
<br>

==8==

<br>MIT6_0001F16_Lecture_08_300k.mp4
<br><code>QmZFSSPndvRfPT2vyehuyEQitfb8CzdYkA7orFAKyvhA4u</code><br>
<br>7a6f85d03f132dcd9d7592bc4643be1c_MIT6_0001F16_Lec8.pdf
<br><code>QmdccChFuYBCiLmufEmk6oXCHybaUQiPXajD3c3xMupiaC</code><br>
<br>0705ac9dcc7e637a0e8e9d97eb258a26_lec8_classes.py
<br><code>QmQCaZZA75UQ5pAKy8zhcz6Ci8yY13UVHUvsuXmid86GUH</code><br>
<br>

==9==

<br>MIT6_0001F16_Lecture_09_300k.mp4
<br><code>QmdENonCipE7TK99i7dFz9paqDUSefR4PFdveEmVi5oXAb</code><br>
<br>2dd6c75e7b4bd6bd135078e6f3701201_MIT6_0001F16_Lec9.pdf
<br><code>QmbaJFk4mFRmCbtQybK94etyfRA2LcM22Kfvjbvdf6X8Gw</code><br>
<br>bf8e8195044d5f6aefc1a455968e2f3e_lec9_inheritance.py
<br><code>QmQ7UB4PaGBRHvHfDshrASwynvansFVXrp3RNULwhThUsC</code><br>
<br>

==10==

<br>MIT6_0001F16_Lecture_10_300k.mp4
<br><code>QmQNooq1g25LFp1Fxj2tfpKKMKi8NbutkhuXNf5Ppo7t5f</code><br>
<br>066eba6ea6d56a88e56ae325940d4c4c_MIT6_0001F16_Lec10.pdf
<br><code>QmbyP59ttPKGe5ZNADsgqTsgBF3oYGzhZXFfBhszG2nuPm</code><br>
<br>bfa32fd241d88ae02cd3157aed232bac_lec10_complexity_part1.py
<br><code>QmUtgXQXjj2C3qb2UXFrPmKHkFdEjmehk4ZLQhcZ37rEmw</code><br>
<br>

==11==

<br>MIT6_0001F16_Lecture_11_300k.mp4
<br><code>QmR7Ned6iZytjpVHVN6W53EZ5Qg4Zd6EkEcXxn8DjYMgrd</code><br>
<br>bb953fb81d4afa3bc837c16eba613955_MIT6_0001F16_Lec11.pdf
<br><code>QmNPjN3616QdmEWLPokwuTkLL1vrzcLVRSFLWUcukqtxZL</code><br>
<br>bdf800867e6762c6758ecd2230178f41_lec11_complexity_part2.py
<br><code>QmdpwFTFkwnkqWW3CozBBAfeYHchDeVAV7ArkA1dUqbUZ4</code><br>
<br>

==12==

<br>MIT6_0001F16_Lecture_12_300k.mp4
<br><code>QmPWidAv5mBrgEcKDVqWe62JaAiwBWs8KZc1S8r3bbJsvY</code><br>
<br>6425d0dabb1cea1a076b8c46c0ae2da6_MIT6_0001F16_Lec12.pdf
<br><code>QmToP68Knz71euVuntRWtz6UshRoiRssELJNFMeP1f2sR5</code><br>
<br>310536cd5f5aa1fc0c11726ce13c565e_lec12_sorting.py
<br><code>QmbV8ct8DEQyRGRDSX4PaQBXk8r8ryYLDNwTa2buC7kcP5</code><br>
<br>